Delivers three times the power of standard M12 connectors for more factory automation applications
Following the recent introduction of its Brad® M12 Power F-coded connector system, Molex, LLC introduces a complete range of T-coded cordsets and receptacles that delivers three times the power of standard M12 connectors. Delivering up to 12.0A per pin, the interconnect system meets the increasing power requirements of DC motors and drives, actuation equipment and 24V DC auxiliary power systems in automation control systems, as well as LED lighting and commercial vehicle applications.
As with the F-coded products, the T-coding mating interface prevents accidental usage with other M12 connectors being used for input, output, signal, or industrial network connections and provide up to 2 DC power circuits (2 x V- / 2x V+). The robust blind-mate key design significantly reduces the chance of mis-mating, especially in restricted access locations where visibility is limited. To eliminate the chance of electrical shock, the connector pins are recessed in a contact carrier. The receptacle design has been enhanced to more efficiently dissipate heat generated by the higher current-carrying capability, while maintaining its compact size.
The 4-pin M12 T-coded connectors will accommodate wire sizes up to 16 AWG/1.5mm2 and are rated for 63V AC/DC operation. An IP67 seal interface makes the Brad M12 Power T-Coded cordsets and receptacles ideal for use in harsh and wet industrial environments. The connector is dust-proof and can be temporarily submerged in up to one metre of water. The T-Coding is according to the IEC Standard 61076-2-111, which allows for an open-industry connector standard, increasing adoption among a wide array of platforms and manufacturers.
To learn more about the complete range of Molex Brad M12 Power cordsets and receptacles, please visit: http://www.molex.com/link/bradpower.html
